Potential influence of microorganisms on the corrosion of carbon steel in the French high- and intermediate-level long-lived radioactive waste disposal context

In the context of the high-level radioactive waste disposal CIGEO, the corrosion rate due to microbially influenced corrosion (MIC) has to be evaluated. In France, it is envisaged to dispose of high- and intermediate-level long-lived radioactive waste at a depth of 500 m in a deep geological disposal, drilled in the Callovo-Oxfordian claystone (Cox) formation. To do so, a carbon steel casing will be inserted inside disposal cells, which are horizontal tunnels drilled in the Cox. A specific cement grout will be injected between the carbon steel casing and the claystone. A study was conducted to evaluate the possibility of MIC on carbon steel in the foreseeable high radioactive waste disposal. The corrosiveness of various environments was investigated at 50°C and 80°C with or without microorganisms enriched from samples of Andra's underground research laboratory. The monitoring of corrosion during the experiments was ensured using gravimetric method and real-time corrosion monitoring using sensors based on the measurements of the electrical resistance. The corrosion data were completed with microbiological analyses including cultural and molecular characterizations.     

A theoretical and experimental study of phosphate ester inhibitors for AISI 1018 in carbon dioxide-saturated 3.5 wt% NaCl solution

Phosphate ester was investigated as a corrosion inhibitor for AISI 1018 carbon steel in carbon dioxide-saturated chloride solutions at different temperatures and pressures. The corrosion tests were realized by electrochemical techniques, weight loss measurements, bubble tests, and a high-pressure/high-temperature autoclave system. The corrosion tests demonstrated that the investigated molecule is an excellent corrosion inhibitor. The inhibiting effect is even bigger at high pressure and temperature than at atmospheric pressure and room temperature. The thermodynamic parameters were calculated and determined to obey the Langmuir isotherm. Polarization studies revealed that the evaluated inhibitor is a mixed type.     

Liquid Phase CO2-Analytics for Standardized Mass Transfer Characterization in Packed Columns

Mass transfer parameters are necessary for the design of absorption and desorption processes in packed columns. To determine the effective interfacial area and liquid side mass transfer parameters, CO₂ absorption and desorption are frequently used. Reliable analytics for concentration determination are essential to obtain correct results. In this work two methods of CO₂ liquid phase analysis are compared: first, the back titration of unreacted NaOH after prior precipitation of the bound CO₂; secondly, the inorganic carbon analysis with a commercial inorganic carbon analyzer.     

Chemical Recycling of Carbon Fiber Reinforced Epoxy Composites Using Mild Conditions

The increased use of carbon fiber reinforced thermosets generates more waste and end-of-life products. However, an efficient recycling method for the expensive carbon fibers has not yet been developed. The selective decomposition of amine-cured epoxy resin under mild conditions is presented. A two-step method was investigated to decompose the epoxy resin. The optimum parameters were initially determined using a model compound. By analysis of the reaction products, a cleavage of the C–N bond according to the Cope elimination could be proven. Therefore, the Cope elimination is suggested as the main step of the decomposition of amine-cured epoxy resins in presence of hydrogen peroxide. By dissolving the resin, it is possible to recover resin-free fibers with unimpaired mechanical properties.     

Experimental study on the deformation and failure mechanism of overburden rock during coal mining using a comprehensive intelligent sensing method

Understanding the spatiotemporal evolution of overburden deformation during coal mining is still a challenge in engineering practice due to the limitation of monitoring techniques. Taking the Yangliu Coal Mine as an example, a similarity model test was designed and conducted to investigate the deformation and failure mechanism of overlying rocks in this study. Distributed fiber optic sensing (DFOS), high-density electrical resistivity tomography (HD-ERT) and close-range photogrammetry (CRP) technologies were used in the test for comprehensive analyses. The combined use of the three methods facilitates the investigation of the spatiotemporal evolution characteristics of overburden deformation, showing that the mining-induced deformation of overburden strata was a dynamic evolution process. This process was accompanied by the formation, propagation, closure and redevelopment of separation cracks. Moreover, the key rock stratum with high strength and high-quality lithology played a crucial role in the whole process of overburden deformation. There were generally three failure modes of overburden rock layers, including bending and tension, overall shearing, and shearing and sliding. Shear failure often leads to overburden falling off in blocks, which poses a serious threat to mining safety. Therefore, real-time and accurate monitoring of overburden deformation is of great significance for the safe mining of underground coal seams.     

Development of ceramic fiber reinforced glass ceramic sealants for microtubular solid oxide fuel cells

Ceramic fibers in various forms with different fiber sizes are tested to improve the sealing performance of glass ceramic seals for microtubular solid oxide fuel cell applications. In this regard, several sealing pastes are prepared by mixing each ceramic fibers type with glass ceramics at 1.25 wt %. Five layered microtubular anode supported cells are also fabricated by extrusion and dip coating methods to evaluate the sealing performance of the composite sealants. The pastes are applied between the cells and gas manifolds made of Crofer22 APU. The electrochemical and sealing performances at an operating temperature of 800 °C under hydrogen are investigated after the glass forming process. Microstructures of the sealants are also examined by a scanning electron microscope. Experimental investigations reveal that the cells sealed by the pastes with ceramic bulk fiber and ceramic fiber rope gasket show acceptable open circuit potentials close to the theoretical one. These cells can be also pressurized up to around 150 kPa back pressure in the sealing performance tests. On the other hand, the pastes without any filler, with ceramic rope and with ceramic blanket exhibit poor sealing performance due to gas leakage originated from flowing of the main glass ceramic matrix from the joints. Therefore, ceramic bulk fiber and ceramic fiber rope gasket are found to behave as a stopper and can be used to prevent glass ceramics from flowing for microtubular solid oxide fuel cells or similar applications.     

Verification of unified effective stress theory based on the effect of moisture on mechanical properties of fiber reinforced unsaturated soil

The unified effective stress theory based on suction stress (SSCC theory) enables the characterization of soils under both saturated and unsaturated conditions with one closed-form relationship. This study provides experimental verification of this theory through the unconfined compressive strength test (UCS) and indirect tensile test strength (ITS) on silty clay soil stabilized with fiber. A series of matric suction, ITS, and UCS tests were conducted to validate the SSCC theory through the representation of the results of ITS and UCS tests in terms of mean total stress (p) versus deviatoric stress (q) and mean effective stress (p`) versus deviatoric stress (q). The results of the validation procedures showed that the SSCC theory is applicable and valid at a range of 6%–16% of water content on the silty clay and the silty clay fiber-reinforced soils. There is a small fluctuation in the increase of ITS and UCS values with increasing fiber content due to randomly oriented distribution of the fiber. The addition of glass fiber does not significantly affect the capacity of water retention of the soil. It improves the condition of the mechanical soil properties at the end of construction more than of the effective stress condition.     

Performance of insulated FRP-strengthened concrete flexural members under fire conditions

This paper presents the results of fire resistance tests on carbon fiber-reinforced polymer (CFRP) strengthened concrete flexural members, i.e., T-beams and slabs. The strengthened members were protected with fire insulation and tested under the combined effects of thermal and structural loading. The variables considered in the tests include the applied load level, extent of strengthening, and thickness of the fire insulation applied to the beams and slabs. Furthermore, a previously developed numerical model was validated against the data generated from the fire tests; subsequently, it was utilized to undertake a case study. Results from fire tests and numerical studies indicate that owing to the protection provided by the fire insulation, the insulated CFRP-strengthened beams and slabs can withstand four and three hours of standard fire exposure, respectively, under service load conditions. The insulation layer impedes the temperature rise in the member; therefore, the CFRP–concrete composite action remains active for a longer duration and the steel reinforcement temperature remains below 400°C, which in turn enhances the capacity of the beams and slabs.     

ZnSe/CoSe/NCDPH composites as anode materials for lithium ion batteries with high capacity and long cycle

In this paper, dopamine hydrochloride (DPH) is introduced to synthesize ZIF-8@ZIF-67@DPH in the preparation of ZIF-8@ZIF-67. ZnSe/CoSe/NC_DPH (N-doped carbon) composites are calcined in a high-temperature inert atmosphere with ZIF-8@ZIF-67@DPH as the precursor, selenium powder as the selenium source. ZnSe/CoSe/NC_DPH has high discharge specific capacity, good cycle stability and outstanding rate performance. The first discharge capacity of ZnSe/CoSe/NC_DPH is 1616.6 mAh g⁻¹ at the current density of 0.1 A g⁻¹, and the reversible capacity remains at 1214.2 mAh g⁻¹ after 100 cycles, the reversible capacity is 416.7 mAh g⁻¹ after 1000 cycles at 1 A g⁻¹. Therefore, ZnSe/CoSe/NC_DPH composites provide a new step for the research and synthesis of new stable, high-capacity, and safe high-performance lithium ion batteries. The bimetallic selenide composites not only have bimetallic active sites, but also can form synergistic effect between different metal phases, which can effectively reduce the capacity attenuation caused by volume expansion and reactive stress enrichment during lithium storage of metal oxide anode materials. Meanwhile, N-doped carbon can improve the conductivity and provide more active sites to store lithium, thus improving its lithium storage capacity.     

Gelatinised and hydrolysed corn starch is a cost-effective carbon source with higher production of L-lactic acid by Bacillus coagulans compared with glucose

L-lactic acid is an important organic acid widely used in pharmaceutical, food and textile industries. Bacillus coagulans BCS13002 can efficiently produce L-lactic acid with two kinds of carbon sources. BCS13002 produced L-lactic acid at a content of 10.23 ± 0.16 g/L and 11.67 ± 0.22 g/L, when glucose and gelatinised and hydrolysed corn starch （GHCS） were used, respectively. GHCS exhibits several advantages, including high yield of L-lactic acid and low cost. Proteomics analyses identified several key enzymes, which contributed to the higher production of L-lactic acid when GHCS was used as the carbon source. Those key enzymes were involved in the two-component system (SpoOF), pantothenate and CoA biosynthesis (pantothenate synthetase, 1.584-fold; dihydroxy-acid dehydratase, 1.517-fold), beta-alanine metabolism (1.605-fold) and valine, leucine and isoleucine biosynthesis (1.517-fold) pathways. This study provides a biological basis for using GHCS as a substitute of glucose in the production of L-lactic acid.